New 2023 Horizon HZ7BP-2

The HZ7 introduces the gooseneck tongue option to Horizons HZ series and is also available as a bumper pull. This hearty unit sits on dual 7k axles and supports loads up to 9,200 lbs. Available in various lengths ranging from 12' to 16' and with various side heights ranging from 2' to 4', this trailer is perfect for your mid-sized hauling opportunities.

The HZ7's bumper pull and gooseneck main frame is composed of 8" I-Beam, while the tilt bed is composed of 5"x5" angle iron with 10-gauge rounded steel sides. The unit stands on 10,000 lbs. jacks and connects with a 15k or 25k coupler, depending on bumper pull or gooseneck configuration.

The hydraulic system comes integrated with remote control, on-board trickle charger, and battery to power the 12v KTI hydraulic pump. The beds scissor lift tilts to over 45 degrees with the power of a 6" cylinder, spanning out to 21". This unit comes packaged with all the quality and safety features of industry leading compliance engineering.

DIMENSIONS

Trailer Lengths (BP): 12', 14', 16'

Trailer Lengths (GN): 14', 16'

Deck/Bed Width: 80.5"

Deck/Bed Height: 28"

Side Height: 2', 3', 4'

FINISH

Prep: Steel Grit Blasted

Paint Type: Powder Coat

Colors: Black, Grey, Red, Orange, White, Lime Green, Cat Yellow, Equipment Blue, Military Green, Desert Tan

JACKS

Front Jack (BP): RAM 1 x (10,000 lbs)

Front Jack (GN): RAM 2 x (10,000 lbs)

CHASSIS

Main Frame: 8" I-Beam (13 lbs/ft)

DECK

Flooring: 1 piece 7 ga. Steel Bed

Height: 28"

Inside Width: 83"

SIDES

Material: 10 gauge Rounded Steel

Fenders: 16" x 9" x 72" x ?” Diamond Plate Steel

Height: 24", 36", 48"

Stake Pockets: 5" x 1-1/2" (ID)

REAR

Gate: 3-Way Doors

Ramps: 6' 7" Slide-In Channel Ramps

ACCESSORIES

D-Rings: Four D-Rings

Tarp: Crank Style Roll-Up Tarp

SUSPENSION

Axle Type: Spring

Axle Count: 2

Axle Rating: 7,000 lbs

Brakes: Electric Brakes on both Axles

Suspension Type: 6-Leaf Slipper Spring (4,000 lbs)

LIFT SYSTEM

System: Hydraulic - Power Up / Down

Pump: KTI 12V Hydraulic Pump

Controller: 14' Control Cable

Cylinder: 6" x 21" Single Push Cylinder w/ Scissor Lift

Tilt Angle: 48°

WEIGHT RATINGS

GVWR (BP): 15,000 lbs

GVWR (GN): 15,680 lbs

GAWR: 7,000 lbs x (2)

DRY WEIGHT

BP: 12' x 2' (Pending), 12' x 3' (Pending), 12' x 4' (Pending)

BP: 14' x 2' (5,445 lbs), 14' x 3' (5,644 lbs), 14' x 4' (5,864 lbs)

BP: 16' x 2' (Pending), 16' x 3' (Pending), 16' x 4' (Pending)

GN: 14' x 2' (6,041 lbs), 14' x 3' (6,239 lbs), 14' x 4' (6,460 lbs)

GN: 16' x 2' (Pending), 16' x 3' (Pending), 16' x 4' (Pending)

LOAD CAPACITY

BP: 12' x 2' (Pending), 12' x 3' (Pending), 12' x 4' (Pending)

BP: 14' x 2' (9,555 lbs), 14' x 3' (9,356 lbs), 14' x 4' (9,136 lbs)

BP: 16' x 2' (Pending), 16' x 3' (Pending), 16' x 4' (Pending)

GN: 14' x 2' (9,639 lbs), 14' x 3' (9,441 lbs), 14' x 4' (9,220 lbs)

GN: 16' x 2' (Pending), 16' x 3' (Pending), 16' x 4' (Pending)

TONGUE

Bumper Pull: RAM Coupler 2-5/16" (15,000 lbs)

Gooseneck: RAM Coupler 2-5/16" (25,000 lbs)

Toolbox: Lockable Toolbox (Houses Battery and Pump)

Type (BP): 8" I-Beam (13 lbs/ft)

Type (GN): 10" I-Beam (15 lbs/ft)

Length (BP): 60"

Length (GN): 102"

SAFETY SYSTEM

Safety Chains: (2)  3/8", Grade 70, Safety Chain w/ Clevis Hooks

Breakaway System: Electric Breakaway Kit

Reflective Tape: 3M Dot Compliant Reflective Tape

TILT

Frame: 5" x 5" x 3/8" Angle Iron (12.3 lbs/ft)

Crossmembers: 3" Channel x (3.50 lbs/ft) at 16" Spacing

RUNNING GEAR

Tires: Radial Tires 

Size: ST235/80R16

Ply: 10 ply

Rating: 3,520 lbs

Rims: 16" Black Mod Wheels

Spare Tire Optional (BP): ST235/80R16 10 ply

Spare Tire Included (GN): ST235/80R16 10 ply

Upgrade Tires to: ST235/85R16 14 ply (4,400 lbs)

ELECTRICAL

Battery: (1) 27 Deep Cycle Marine Battery

Charging System: 110V Integrated Trickle Charger

Wiring Harness: All-Weather (7-Way RV)

Frame Wiring: Double Insulated Wiring Harness

Side Markers: DOT Approved LED Lights